Aerial crop spraying: how to order, a guide for farmers and suppliers
What aerial spraying is, when it fits, what to prepare, and how the order flows in Plannter from the request to the record.
Last updated
Aerial spraying is applying a product from the air, from a spray plane or a drone, over a plot. To order it you give the supplier the same facts as any spray order: plot, crop, product, dose, area and date, and you mark that the method is aerial. In Plannter the farmer sends one request, the supplier checks and confirms, books a slot, and after the job the record is stored on the plot history. Both sides see the same order.
What aerial spraying is
Application from the air, not from the tractor
In ground spraying the tractor drives through the field with a sprayer. In aerial spraying the machine flies over the plot. That can be a spray plane or a drone. The goal is the same: apply the product that was agreed, at the dose that was agreed, on the plot that was marked.
Who decides the product and the method?
The product and dose are usually set by the farmer with an agronomist or farm adviser. The supplier executes according to the order. The application method (ground, aerial or drone) should be closed before you send the request, so the supplier knows what to book. A general spray-order guide is in How to order crop spraying.
When aerial spraying fits
There is no single rule. These are the signs to check with the supplier or adviser before you order:
Aerial spraying does not fit every plot. A small field with easy tractor access can stay on ground spraying. The weather window is narrower from the air, so give the supplier several days, not one hour.
What the farmer should prepare
A good order is one the supplier can confirm without calling again
How the order flows in Plannter
The same path serves farmers and suppliers: request, supplier confirmation, booking, record. This is how it looks from the order to the plot history.
Step 1: Request from the farmer
Open an order in Plannter: plot, crop, product, dose, area, date, and mark the method as aerial.
Step 2: The supplier checks and confirms
The supplier gets an alert, sees the same order, checks availability and fit, and confirms or asks for missing details.
Step 3: Booking a slot
After confirmation the supplier books the job. If the weather moves, the new time sits on the same order.
Step 4: Record after the job
Done status is stored on the plot history. Farmer and supplier see what was done, when and by whom.
The order form is explained on spray ordering in the app. After the job, also read the spray journal, so you know which fields are stored on the plot.
Both sides on the same order
The farmer orders in the farm app or in the farm management system. The supplier receives, confirms and books in the supplier system. There is not one thread at the farmer and another at the supplier.
- One request with plot, product, area and date
- The supplier confirms and books on the same order
- A wind delay shows up for both sides
- After the job, a record is stored on the plot history

Note: This guide is not professional, legal or regulatory advice. Use of crop-protection products follows the label and the rules for your crop and area. Check with an agronomist.
Questions about aerial spraying
What is aerial spraying?
Applying a product from the air, from a spray plane or a drone, over a plot. Farmer and supplier agree in advance on the plot, crop, product and date, and the supplier executes when weather and access allow.
When does aerial spraying fit better than ground spraying?
When the area is large, when tractor access is hard, or when several plots must be covered in a short window. The choice depends on crop, size and weather. If you are unsure, ask the supplier or an agronomist.
What should I prepare before ordering aerial spraying?
A plot map or a clear boundary mark, the crop name, the product and dose from the label, area in dunams, a date window, and how to reach the field. With those facts the supplier can confirm and book without extra calls.
How do I order aerial spraying in Plannter?
The farmer opens an order, picks a plot and fills crop, product, dose, area and date. Mark that the method is aerial. The supplier gets an alert, checks and confirms, then books a slot that the farmer sees on the same status.
What does the supplier do after a request arrives?
The supplier sees the same order, checks if the window works, confirms or updates the date, and books the job. Missing map, access or product details can be asked on that order instead of a separate thread.
What if the wind or weather is wrong?
Aerial spraying depends on a weather window. Strong wind, rain or poor visibility can delay the job. In Plannter the supplier updates the date on the same order, and the farmer gets an alert with the new date.
How is aerial spraying recorded after the job?
When the supplier marks done, the order is stored on the plot history: what was sprayed, when, with which product and dose, and who did it. Farmer and supplier see the same record.
Can I order a drone, not only a plane?
Yes. The same order fits a spray plane and a drone. Mark the method in the order details so the supplier knows what to book. The choice depends on the plot, the crop and what the supplier runs.
Order aerial spraying in Plannter
One request, supplier confirmation, booking and a record per plot. For farmers and suppliers.