Guide

How to order crop spraying: a step-by-step guide

Who to call, which details to give, how to follow the order, and what happens after the job

Last updated

To order crop spraying you contact a spray supplier (ground, aerial or drone) and give five facts: which plot, which crop, which product and dose, how many dunams, and when it should run. After the supplier confirms, you follow the status until the job is done and keep the record on the plot history. In the farm management system from Plannter those steps live on one form, and farmer and supplier see the same order.

Step 1: who do you call to order spraying?

A ground, aerial or drone spray supplier

The choice depends on the crop, the plot size and access. Orchards and open field crops are often sprayed with a tractor and a sprayer. Large or hard-to-reach plots sometimes fit aerial spraying or a drone. If you are not sure, ask the supplier or your farm adviser which method fits.

Who decides the product?

The product and dose are usually set by the farmer with an agronomist or farm adviser. The supplier executes according to the order. Close that decision before you contact the supplier, so the order is not delayed.

Step 2: which details belong on the order?

A good order is one the supplier can execute without calling again. These are the details worth including:

DetailWhat to writeWhy it matters
PlotPlot name or number, and a location if you canSo the supplier arrives at the right plot
CropWhat is growing and at which stageIt affects the product, the dose and the method
Product and doseThe label name, and the amount per dunamSo the supplier brings the right quantity
Area in dunamsHow many dunams to spray in practiceBase for product quantity and job time
DateA requested date and a flexible windowLets the supplier book the job
WeatherWind, rain or heat limits that matter to youSpraying in strong wind can hurt efficiency
ApprovalWho approves the order and who is on siteAvoids a later 'I thought you cancelled'

Timing and weather

Spraying depends on weather. Wind, expected rain or extreme heat can delay a job. Give the supplier a window of several days, not one date, and agree in advance what happens if the job has to move.

Step 3: how do you follow the order?

After you send the order, you need three facts: that the supplier received it, that a date was confirmed, and when the spray actually ran. On WhatsApp or the phone that means asking again and again. In Plannter the supplier updates status, and you get an alert: received, confirmed, done. If the supplier moves the job because of wind, the new date sits on the same order.

Step 4: what happens after the spray?

A record on the plot history

After the job you record what was sprayed, when, with which product and dose, and who did it. That helps plan the next spray and avoid repeating the same product too often. The full field list is in the spray journal guide.

A field check and payment

Walk the plot after the spray and confirm the job was done as agreed. Then close the account with the supplier against what was actually executed.

Note: This guide is not professional, legal or regulatory advice. Use of crop-protection products follows the label and the rules for your crop and area. Check with an agronomist.

Common mistakes when ordering spraying

A short message with no details

'Come spray tomorrow' with no plot, product or area leads to extra calls and mistakes.

An inaccurate area

A dunam error changes how much product is needed and how much time the supplier books.

Ordering at the last minute

In a busy season suppliers are booked ahead. A late order can delay the spray.

No weather plan

Without a flexible window, every wind change becomes another round of calls.

No record after the job

A few months later nobody remembers what was sprayed and on which plot.

The order is split across channels

Some on the phone, some on WhatsApp, some in a notebook. There is no one place that shows what was agreed.

WhatsApp and phone versus an order in Plannter

WhatsApp / phoneOrder in Plannter
Order detailsScattered in messages and callsOne form: plot, crop, product, dose, area, date
StatusYou have to ask the supplierThe supplier updates, and you get an alert
Date changeAnother call and another messageThe new date sits on the order
HistoryBuried in a threadSaved automatically per plot
Both sidesEach side remembers something elseFarmer and supplier see the same order

A full comparison is on the Plannter versus WhatsApp page.

How to order spraying in the Plannter app

  1. Open an order: pick a plot, fill crop, product, dose, area and a requested date.
  2. The supplier receives and confirms: they get an alert, book the job and update the date.
  3. Follow it live: see the status, and if weather moves the job, it shows on the order.
  4. History is saved: after the job the order is stored on the plot history.

Why it works: the order flows between both sides. The farmer orders in the farm app, and the supplier runs their jobs in the supplier system.

Tractor spraying in a field, crop spray order
FAQ

Common questions

How far in advance should I order spraying?

There is no single rule. It depends on the supplier, the season and urgency. In a busy season order as early as you can and give a window of several days, so the supplier can book the job and fit it to the weather.

What should I prepare before ordering spraying?

Plot, crop, product name and dose from the label, area in dunams, a date or requested window, and a contact on site. With those facts the supplier can execute without extra calls.

Who decides which product to spray?

Usually the farmer together with the adviser or agronomist. The supplier executes according to the instructions on the order.

What happens if there is strong wind on spray day?

Spraying in strong wind can hurt efficiency, so the job is usually moved. In Plannter the supplier updates the new date, and it shows on your order.

How do I know the spray was done?

In Plannter the supplier marks status Done and you get an alert. Also walk the plot and confirm the work was done as agreed.

Does the supplier need to be on Plannter?

Yes. The order flows between farmer and supplier, and both sides need the system to see the same status.

Can I order spraying from the phone?

Yes. The Plannter app is on the App Store and Google Play, and there is also browser access.

Order the next spray in Plannter

One order, live status, and history per plot. No searching WhatsApp.

Download the farm appFarm management systemApp StoreGoogle Play